English | Quantity: |
|---|
Adopts vacuum suction screw method, high universality, overcome the blowing screw can’t send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can’t suction stainless steel screw . for M1.0 – M4.0 screws all can be applied, such as screw size changed, just need to change the suction nozzle.
1.Applies to most of the screws, strong commonality, the screw length to diameter ratio and material there is no requirement.
2.Can replace artificial specific screw lock pay operations, realizing mechanization production.Reduce the labor intensity of workers.The traditional manual screw placement, and alignment of the screw head need to work takes up a lot of time and energy.
3.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly master the operation skill and debugging.
4.Apply to mobile phones, digital products, photoelectric, health care, small household electrical appliances.
Automatic screw feeder machine
| Model No. | Double Head Double Y Screwdriver Robot TD305 |
| Dimension (mm) | 880*900*840 |
| Net Weight | 75KG |
| Operation Range | 600*330*330*120 |
| Axes | 4 Axis (X, Y, Y,Z) |
| Move Speed | X,Y 600-800MM/S,Z 400MM/S,R 300°/S |
| Repeated Precision | +/-0.02 mm |
| Power Supply | AC220V 50HZ OR 110V 60HZ |
| Power Source | Electricity + Pneumatic |
| Air Pre. Req | 0.4 to 0.6 MPa (4 to 6 kg/cm2) as dry air |
| Control Panel | Teach pendant (optional:PC or Touch Screen) |
| Communication | USB + RS232 |
| Transmission Mode | Timing Belt + Screw Rod +Guide Rail |
| Screwdriver Brand | Customized |
| Torque Range | 0.5-15 kgf.cm (can be adjusted) |
| Feeder Mode | Adsorption Type |
| Control System | Motion Control or PLC +Teach Pendant |
| Driving Mode | Precision Stepping Motor+Timing Belt |
Adopts vacuum suction screw method, high universality, overcome the blowing screw can’t send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can’t suction stainless steel screw . for M1.0 – M4.0 screws all can be applied, such as screw size changed, just need to change the suction nozzle.
1.Applies to most of the screws, strong commonality, the screw length to diameter ratio and material there is no requirement.
2.Can replace artificial specific screw lock pay operations, realizing mechanization production.Reduce the labor intensity of workers.The traditional manual screw placement, and alignment of the screw head need to work takes up a lot of time and energy.
3.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly master the operation skill and debugging.
4.Apply to mobile phones, digital products, photoelectric, health care, small household electrical appliances.
Automatic screw feeder machine
| Model No. | Double Head Double Y Screwdriver Robot TD305 |
| Dimension (mm) | 880*900*840 |
| Net Weight | 75KG |
| Operation Range | 600*330*330*120 |
| Axes | 4 Axis (X, Y, Y,Z) |
| Move Speed | X,Y 600-800MM/S,Z 400MM/S,R 300°/S |
| Repeated Precision | +/-0.02 mm |
| Power Supply | AC220V 50HZ OR 110V 60HZ |
| Power Source | Electricity + Pneumatic |
| Air Pre. Req | 0.4 to 0.6 MPa (4 to 6 kg/cm2) as dry air |
| Control Panel | Teach pendant (optional:PC or Touch Screen) |
| Communication | USB + RS232 |
| Transmission Mode | Timing Belt + Screw Rod +Guide Rail |
| Screwdriver Brand | Customized |
| Torque Range | 0.5-15 kgf.cm (can be adjusted) |
| Feeder Mode | Adsorption Type |
| Control System | Motion Control or PLC +Teach Pendant |
| Driving Mode | Precision Stepping Motor+Timing Belt |
