How to share a toilet without a plunger, because that's really just rough – CNET

0
93
Dawn-in toilet bowl

Dawn-in toilet bowl

You can clean most clogged toilets with nothing but soap, hot water, and some time.

Dale Smith / CNET

For many years I have practiced and refined the ancient magic art of clogging a clogged toilet without using a plunger. This particular type of washroom wizardry is especially useful if you ever stare at someone's clogged chest of drawers otherwise it is Bathroom, a situation where you understandably are reluctant to ask for help.

I didn't invent this particular process for plunging without a plunger – the same basic technique is common across the internet in plumbing and DIY blogs, both mainstream and in the dark – but I can attest to its strength and power.

Indeed, the next time you clog a toilet for any reason, even if you do to do If you have a plunger on hand, try this instead and avoid the tangy, dripping, and unsanitary mess that a plunger can cause.

img-1398 "data-original =" https://cnet1.cbsistatic.com/img/vKtBi99VXma56TQW9poJ7jsrpQI=/2020/01/14/289fa857-d1b5-4eac-ad87-a5fea400dc44/img-1398.jpg

Detergent works best, but a pinch of hand soap will do you good. Then all you need is hot water and something you can use to put it in the toilet, like a small trash can.

Dale Smith / CNET

Most bathrooms have everything you need

To do this trick, you need three things that can be found in almost every bathroom: soap, hot water, and a jar to direct the water into the toilet bowl. Dishwashing liquid and a five-gallon bucket work best, but if secrecy is paramount and leaving the toilet would go beyond your cover, a small plastic waste container and a few pumps from the hand soap dispenser will do the trick.

To prepare, you should let the hot water flow in the sink or tub and give it enough time to reach the maximum temperature. You don't want to (or need to) use boiling water that could damage or worse injure the porcelain of the toilet she, Let the tap get as hot as possible – it will be hot enough.

http://www.cnet.com/ "height =" 110 "width =" 196


Currently running:
Look at that:

The future of Poop Tech: Charmins toilet paper delivery …


2:01

While waiting for hot water, remove everything from the floor, e.g. B. sheds or bath mats. You will of course be very careful to avoid any spillage, but to be sure you shouldn't get wet.

Mix the potion

The goal is to make the liquid in the toilet bowl as hot and soapy as possible without overflowing. To do this, you can either pour soap directly into the bowl (or pump it) and then add hot water, or you can mix the soap with the hot water before adding it to the bowl.

img-1394 "data-original =" https://cnet1.cbsistatic.com/img/oUvpjGkXUp_PHNCRy6VWQO3Uvgo=/2020/01/14/6b105018-7d82-447b-81ec-6dab4bc08bf1/img-1394.j

Many trash cans are small enough to fit under the sink. If this is not the case, you can use the bath or shower tap.

Dale Smith / CNET

I prefer to put soap directly into the toilet bowl if the constipation doesn't leave much space (let's say less than 1 inch). This ensures a high soap-water ratio. However, if there is enough space above the waterline (one or two inches or more), pre-mixing will provide a more even soap distribution.

You really can't overdo the soap at this point. You won't stir up the solution, so you won't create a foam volcano if you go overboard. I'm not saying you have to pour the whole bottle in, but I'm not saying that you shouldn't. From a tablespoon to half a cup, everything should work.

Carefully and carefully add the hot water

Mixing everything in the toilet bowl is the step that requires the most finesse. You want to increase the average water temperature and get the soap in every crack, but you don't necessarily want to create a slurry with what's already in it.

screen-shot-2020-01-14-at-11-15-06-am.png "height =" 0 "width =" 370 "data-original =" https://cnet4.cbsistatic.com/img/6pUO4YSV -nqZfwtznZZ12QH44JQ = / 370x0 / 2020/01/14 / 423aa182-3e30-4c0e-8c73-b08b8a1bd5da / screen-shot-2020-01-14-at-11-15-06-am.png

Add 10 to 100 sprays of hand soap to your solution – you really can't overdo it.

Dale Smith / CNET

So don't use anything to stir it up. Instead, don't be afraid to pour your hot water. Just be careful not to overfill.

Most toilet supports are not completely blocked, so there is a good chance that yours will drain slowly first. Keep an eye on the water level and, as the water level drops, add more and more hot water to keep it full. If the constipation is not too persistent, the additional pressure of a full toilet bowl should help the secured matter pass through fairly quickly.

If everything else fails, time is on your side

The worst scenario is that the clog is jammed too tight and the steps above don't push it down immediately. In this case, you don't have to call a plumber or go to the hardware store.

Give him some time so that the hot soapy water can dissolve the constipation. Go away, close the bathroom door, and wait 30 to 60 minutes before checking again. When you do this, you may be pleasantly surprised that your problem has been flushed down the drain.

Your toilet isn't the only household plumbing device that can get clogged, but luckily, there are equally quick, clean, and efficient ways to solve other simple house installation problems. If the drain in your kitchen is causing you grief, check it out Three techniques for unblocking your sink, When your shower head is not as heavily loaded as it used to be. Here's how to do it quickly Break up mineral accumulations in your shower head, As soon as you have clarified this disposal, consider whether you use it wisely and Rinse your refrigerator with this easy-to-understand guide,