What Can You Expect From Underwater Fiber Optic Cable Installation?

Under water cable installation

When you are ready to set up an offshore rig, there are a lot of things that would need to happen for you to power and connectivity to your new offshore rig or station, and that is why you should work with professionals who can lay these cables underwater so that you can get back to work. Your company will improve dramatically when you are working with these submarine cable installers, and you can create a system that no one can see but works perfectly.

How Do You Work With Fiber Optic Cables?

It all starts with the design of the fiber optic system which needs to take into account how far you are from the shore, how fast the system should be, and how heavy the cables should be. This is something that you might not realize, and that is why it takes some time to build these cable systems. Once the cables are built, you can see a test of the cables to know that they are working properly. This makes it much easier for you to know if you can get the performance you want, and you should also work with the engineers to know what can be done as far as installation goes.

You know that you need connectivity, you have seen it all work, and now you can get the submarine cable laid.

How Do You Get Fiber Optic Cables Installed?

When you need ocean fiber optic cable for your facility, it needs to be sailed to your location so that it can be laid underneath the water. The submarines that are used are actually known as ROVs, and they will carry the cables to the bottom of the ocean. One of the things you need to realize is that the ocean has an average depth of about 12,000 feet, and that is why it can take some time to make sure that the cables get to the bottom. It is completely black down there, and the ROVs must be fitted with lights that allow pilots using remotes on the boat to see where the cables will go.

How Are The Cables Attached?

Submarine fiber optic cable installations are attached at both ends only when the job is done. The network can be brought online, and you can see if it is functioning properly or not. You can learn how to test the system, and you can start trying a few things that will show if the system works or not. This is very important because you need to know you are connected and you can easily communicate with the right or station even if it is 1000 miles away.

Why Do You Need Underwater Cables?

Underwater fiber optic cable is important because you cannot use a singular source for connectivity when you are far from the shore. You are not going to catch any cell towers, and there is no way to know how a satellite link would work because it can be interrupted by solar flares and bad weather. You can use the wired connection to make sure that you can reach your team on the shore at any time, and you do not need to worry about losing the signal because of things that you cannot control. 

How Do You Get Services Done?

One of the best parts of submarine cable is that it can be serviced by the same submarines that installed the cable. The team that was on the boat when your installation is done will go out to check the length of the cables, and you can get information about the cables if there is a problem. If possible, the cables can be repaired, and you will go back online as soon as possible. 

How Long Does It Take To Get This Done?

When you want to use an ocean fiber optic cable, you can be sure that it will last for a long tie. Because you need years of service out of these cables, they should be installed properly. This is why you should allow the engineer time to figure out how long it will take to get the job done. If you have a deadline, you should make sure that you have shared that deadline with the engineer because they are just as responsible for that deadline as you are. You can get your tests done, and you can get to work.

Why Do Underwater Cables Work?

There is no way to use cables that ride over the top of the water. You can use a submarine fiber optic cable when you would like to connect, and you can stay in touch with all the people on your rigs so that you know they are safe and productive. You also need to make sure that you have cables built and tested that will be perfect for you because it can be very hard for you to get the results you want if you have not asked the engineer to full test the system and prevent defects that might have occurred.